Model #: TE70FG - TE100FG
35 / 50 TON - FOLDING GOOSENECK TRAILER
The Folding Gooseneck is coming back. A trailer that was the "go-to" in the early days, is making a major comeback. Contractors hauling multiple pieces of equipment requiring a low load angle, have asked for many different options to make it the revisited "go-to" trailer. TRAIL-EZE Trailers has been working with the Railroad and Paving Industries, as well as Government and Military entities, for many years to perfect the design.
Capacity : TE70FG - 70,000 Lb capacity - 2 axle
Capacity : TE100FG - 100,000 Lb capacity - 3 axle
Main Bed Length : 20'-26'
Upper Deck Length : 9'-8"
Width : 8'-6"
Swing Clearance : 82"
King Pin Setting : 16"
Deck Height : 39 1/2" - (unloaded single drop)
Deck Height : 30" - (unloaded double drop)
Frame : All high tensile steel. Custom manufactured beams designed for stress loads at a minimum of a 2:1 safety factor.
Deck : 2" Oak decking attached to crossmembers with two torx head screws. Load bearing wheel bolsters between each axle.
Folding Neck : Twin arm folding neck, allows full length of neck to lay on the ground. Arms pivot around free floating steel pins which are able to rotate with either the arms or the main trailer structure.
Loading Pins : Safety pin is located in the arms to hold trailer in an upright position when not supported by a towing vehicle. Also, to help dampen "fore and aft" oscillation when empty.
Axles : 25,000 Lb
Brakes : 16 1/2" x 7" Air, outboard drums
Wheels : 8.25 x 22.5 Disc pilot mounted
Tires : 255/70R x 22.5 Low profiles
Suspension : Air ride with dump
Tie Downs : 5 Per side of deck bed and one on each bolster
Electrical : ICC D.O.T. Sealed beam light and reflector kit
Paint : Trailer sandblasted, primed and painted
Warranty : Limited 5 Year Pro-Rated Major Structural Warranty
Options : Many Options Available