Trailers
- 20 / 25 TON - SLIDING AXLE RAILROAD TRAILER
TE401RR - TE501RR
When hauling railroad equipment, safety is our #1 priority!! TRAIL-EZE's Sliding Axle Trailer line is not only safe, but it is reliable and easy to load. With a 6 1/2 degree load angle on our 53' long trailer, there is no need for heavy ramps or lifting, and with a winch located on the upper deck, you will never have to worry about geting a piece of equipment loaded. Offered in 20 Ton, 25 Ton, 35 Ton, 40 Ton and 55 Ton capacities (TE401RR, TE501RR, TE701RR, TE801RR & TE1101RR) with endless options, TRAIL-EZE will make your next purchase an easy one!!
For the TRAIL-EZE "SLIDE AXLE SERIES (01)" and "CONTAINER FRAME SERIES" trailers manufactured after January 01, 2017, come with a Limited 10-Year Warranty on the original POLY slider pads and POLY scissor neck pin bushings that exceed 1/8" of normal wear.
Competitors using grease style pins and rollers require frequent maintenance and can be a hassle getting to them, not to mention just plain messy. By eliminating the hassle of greasing, customers appreciate the benefit and value of reduced maintenance provided by the POLY pads and bushings.
Dimensions
Capacity : 40,000 Lbs Payload capacity
Overall Length : 36' (30' Main bed, 6' Tongue)
Bed Length : 30'
Width : 8'-6"
Deck Height : 37"
Features
Frame : High tensile steel I-beam main frame and crossmembers
Deck : 2" Oak decking
Load Angle : 8 Degrees
Pintle Hitch : 3" ID Adjustable
Cylinders : (2) Tilting cylinders - (1) Sliding cylinder
Axles : (2) 20,000 Lb capacity
Brakes : 12 1/4" x 7 1/2" with S-Cam air auto slack adjusters, ABS, spring brakes and outboard drums
Wheels : (8) 6.75 x 17.5 HP 8-hole steel
Tires : (8) 235/75R x 17.5 HRT 16-Ply Generals
Suspension : H-9700 Spring
Tie Downs : 6 per side
Safety Chains : 1/2" with hooks
Electrical : ICC D.O.T. Sealed LED light system and reflector kit
Paint : Trailer sandblasted, primed and painted
Warranty : Limited 5 Year Major Structural Warranty
Tongue Jack : 2-Speed, 16,000 Lb, 35,000 Lb static
Options : 2" x 2" Solid rail in main bed - Special rail ramps to assist in loading and unloading rail equipment - 13HP Honda Self-contained mounted in tongue to run winch, axle slide and bed tilt - Flag holders at rear of trailer - I-beam crossmembers on 12" centers - Knife edge to be notched out for easy loading of rail equipment