Trailers

- 20 / 25 TON - SLIDING AXLE RAILROAD TRAILER
TE401RR - TE501RR

When hauling railroad equipment, safety is our #1 priority!!  TRAIL-EZE's Sliding Axle Trailer line is not only safe, but it is reliable and easy to load.  With a 6 1/2 degree load angle on our 53' long trailer, there is no need for heavy ramps or lifting, and with a winch located on the upper deck, you will never have to worry about geting a piece of equipment loaded.  Offered in 20 Ton, 25 Ton, 35 Ton, 40 Ton and 55 Ton capacities (TE401RR, TE501RR, TE701RR, TE801RR & TE1101RR) with endless options, TRAIL-EZE will make your next purchase an easy one!!

For the TRAIL-EZE "SLIDE AXLE SERIES (01)" and "CONTAINER FRAME SERIES" trailers manufactured after January 01, 2017, come with a Limited 10-Year Warranty on the original POLY slider pads and POLY scissor neck pin bushings that exceed 1/8" of normal wear.

Competitors using grease style pins and rollers require frequent maintenance and can be a hassle getting to them, not to mention just plain messy.  By eliminating the hassle of greasing, customers appreciate the benefit and value of reduced maintenance provided by the POLY pads and bushings.

Dimensions

Capacity : 40,000 Lbs Payload capacity

Overall Length : 36' (30' Main bed, 6' Tongue)

Bed Length : 30'

Width : 8'-6"

Deck Height : 37"


Features

Frame : High tensile steel I-beam main frame and crossmembers

Deck : 2" Oak decking

Load Angle : 8 Degrees

Pintle Hitch : 3" ID Adjustable

Cylinders : (2) Tilting cylinders - (1) Sliding cylinder

Axles : (2) 20,000 Lb capacity

Brakes : 12 1/4" x 7 1/2" with S-Cam air auto slack adjusters, ABS, spring brakes and outboard drums

Wheels : (8) 6.75 x 17.5 HP 8-hole steel

Tires : (8) 235/75R x 17.5 HRT 16-Ply Generals

Suspension : H-9700 Spring

Tie Downs : 6 per side

Safety Chains : 1/2" with hooks

Electrical : ICC D.O.T. Sealed LED light system and reflector kit

Paint : Trailer sandblasted, primed and painted

Warranty : Limited 5 Year Major Structural Warranty

Tongue Jack : 2-Speed, 16,000 Lb, 35,000 Lb static

Options : 2" x 2" Solid rail in main bed - Special rail ramps to assist in loading and unloading rail equipment - 13HP Honda Self-contained mounted in tongue to run winch, axle slide and bed tilt - Flag holders at rear of trailer - I-beam crossmembers on 12" centers - Knife edge to be notched out for easy loading of rail equipment