Trailers
- 35 / 40 TON - HYDRAULIC BED TILT and LOW LOAD ANGLE TAIL TRAILER
TE70TXT - TE80TXT
The TRAIL-EZE TXT Model was designed as a highbred trailer that took the best of both worlds and combined them. It has the benefit of our XT Hydraulic Tail, with a 10 degree load angle, and the full bed tilt option of our Hydraulic Sliding Axle trailers. This makes loading equipment from the ground to the upper deck very safe and effortless. The TXT Model has benefited companies in the Rental, Rigging and Construction Industries. With many configurations and multiple options to choose from, you should have no problem setting up this trailer to work as hard as you do!!
Dimensions
Capacity : TE70TXT - 70,000 Lb distributed / 40,000 Lb concentrated in 10' / 50,000 Lb concentrated in 16'
Capacity : TE80TXT - 80,000 Lb distributed / 50,000 Lb concentrated in 10' / 60,000 Lb concentrated in 16'
Overall Length : 40' to 53'
Main Deck Length : 22'-3" to 35'-3"
Upper Deck Length : 8'
Hydraulic Tail : 11'-3"
Flip Under Ramp : 5' with 10 degree load angle
Width : 8'-6"
Features
Frame : All hi-tensile steel. Custom manufactured beams designed for stress loads at a minimum of two times rated capacity.
Deck : 1 1/2" Oak decking. 1/4" Steel tread plate covers the wheel area and over flip tail
Axles : (2) 22,500 Lb capacity with oil seal hubs
Brakes : 12 1/4" x 7 1/2" Air. Outboard drums with ABS, auto slack adjusters and spring brakes.
Wheels : (8) 6.75 x 17.5 Disc wheels
Tires : (8) 235/75R x 17.5 Radials
Landing Gear : Pin drop landing gear
Suspension : Air ride with dump valve mounted by controls
Tie Downs : D-rings, stakepockets or Gotcha's on 4' centers
Tool Box : (1) Tool box with lid located upper deck drivers side front of trailer
Winch : 12,000 Lb mounted front center of upper deck with wireless remote. Controls are located on driver side of upper deck.
Electrical : ICC D.O.T. Standard sealed beam lights with mid-ship turn signal
Paint : Trailer sandblasted, primed and painted
Warranty : Limited 5 Year Major Structural Warranty